Rising vapor passes through risers into bubble cap which then forces vapor downward,  and the vapor later bubbles out through slots into liquid on the tray.
Types of bubble caps：
 Rectangular or round
 Slotted or fully enclosed
 Sized from 2” to 6” diameter

Vapor enters through openings in the tray panels and through valves，interacting with liquid on the tray.

Types of valves ：

Floating or fixed or caged (Floating valves allows low pressure drop ; vapor-flow variation of floating valves might improve turn-down ratio)

Round or rectangular or specialized shapes

Light or heavy configurations

Punched or specialized for fouling applications (fixed valve with high fouling protection)

Sieve Tray is a perforated flat designed plate, which is widely applied in industry process.

Dual flow trays are sieve trays without downcomers, which are originated from countercurrent flow of the vapor and liquid through the perforations.

We provide high-performance replacement of random packing such as Pall Rings (Thermoplastics, Metals), Raschig Rings (Ceramics, Metals) and Saddles (Ceramics, Thermoplastics).

• type R - a 45° crimp can be applied for most distillation

• type S - a 60° crimp can be applied for high liquid rate , such as heat transfer beds

• type HC - fine dimple pattern embossed on the surface can be optimized for maximizing liquid spreading and wetting ability

Random packing support offers an 100% open area

Structured packing support can be made of various metal or thermoplastic materials.

Hold down plates can be applied above ceramics and carbon random packing,

Packing bed limiters can be applied for plastic and metal random packing, being fastened to column by support rings and bolting or being jointed to the liquid distributor by tie-rods.

Liquid distributors can be applied above each bed of packing in packed towers for being distributed uniformly.

The most widely used mist eliminator in industrial applications is the knitted-wire-mesh type. These mesh eliminators consist of a pad of knitted wire mesh packed between two rigid grids for support. Liquid droplets accumulate on the wires, while vapor flows upward through the mesh pad. Gravity causes the liquid to drain from the mesh.

Wiped Film Evaporator has the advantages of high heat transfer efficiency, short residence time, and operation under vacuum conditions, so it has been widely used in many industries. In the chemical industry, it is mainly used in the production of fine chemical products and petrochemical industry; In the pharmaceutical industry, it is mainly used in drug concentration and purification, and the treatment of traditional Chinese medicine extracts.